Home>Products>Bearing Slewing Ring>M5-34P1 Rotek Slewing Ring Bearings
M5-34P1 Rotek Slewing Ring Bearings
category
Bearing Slewing Ring
Rotek M5-34P1 Bearing SPECIFICATIONS
Various Bearing Slewing Ring types China Rexroth a10vg Hydraulic Pump Supplier and sizes 500 mm d1 to accommodate 10 mm A your M5-34P1 Rotek Slewing Ring Bearings requirements.
- Rotek
M5-34P1
- Negotiation
- Negotiation
- China Rexroth a10vg Hydraulic Pump Supplier2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
M5-34P1 Rotek Slewing Ring Bearings Product identifiers
- 10 mm
- HMV 112 E
- 500 mm
- 337 mm
- 325 mm
- G 1/4
- 53 mm
- Tr 560x6
- 530 mm
- 93.5 kg
Rotek M5-34P1 M5-34P1 Rotek Slewing Ring Bearings Frequently purchased together
L6-29N9Z Rotek Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:4500 rpm; Basic Dynamic Radial Load Rating C:72800 N; Oil Speed Rating n2:5300 rpm; d:80.000 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; Accessories:Two Seals & Snap-Rin; D:140.0000 mm; Grease Speed Rating n1:4500 rpm; Fillet Radius ra:2.00 mm; B:26.00 mm; Basic Static Radial Load Rating Co:53000 N; Sealed Speed Rating n3:3000 rpm; |
R9-59N3 Rotek Slewing Ring Bearings | Limiting speed:1400 r/min; Mass bearing + sleeve:109 kg; d2 ≈:301 mm; b:16.7 mm; B1:190 mm; Basic dynamic load rating C:2664 kN; K:9 mm; Calculation factor Y2:3.3; d1:240 mm; Fatigue load limit Pu:290 kN; D1 ≈:380 mm; Ba min.:11 mm; Reference speed:1100 r/min; Da max.:423 mm; B4:39 mm; Calculation factor e:0.31; r1,2 min.:4 mm; ra max.:3 mm; Calculation factor Y0:2.2; D:440 mm; |
W16-84P1 Rotek Slewing Ring Bearings | dk:40.7 mm; C1 max.:20 mm; l7 min.:34 mm; l2 max.:149 mm; h:110 mm; Basic static load rating C0:81.5 kN; d2 max.:75 mm; B:22 mm; Mass rod end:0.9 kg; G:M 30x2; l1 min.:65 mm; α:6 °; d:30 mm; r1 min.:0.6 mm; Basic dynamic load rating C:62 kN; Material constant KM:330; Specific dynamic load factor K:100 N/mm²; |
M5-30P1 Rotek Slewing Ring Bearings | Taconite seal (db shaft position):TER 175; da:200 mm; R1:122.237 mm; A2:374.65 mm; db:222.25 mm; Stabilizing ring:SR-40-34; Initial grease fill:2154.6 g; H:422.275 mm; J max.:635 mm; PG:1/4 NPT; Pa:77 kN; h:63.5 mm; H2:85.725 mm; RG:1 NPT; H1:209.55 mm; P120°:136 kN; Cap bolt recommended tightening torque:271.2 N·m; dc:193.675 mm; Ca:137.82 mm; Mass pillow block:195 kg; |
A12-47P2 Rotek Slewing Ring Bearings | Limiting speed:430 r/min; D:680 mm; Mass bearing:39 kg; Db max.:667 mm; Basic static load rating C0:2360 kN; s max.:5 mm; D1 ≈:643 mm; da min.:573 mm; d1 ≈:603 mm; E:655 mm; Da max.:667 mm; d:560 mm; das:597 mm; Basic dynamic load rating C:1020 kN; Fatigue load limit Pu:186 kN; Calculation factor e:0.2; Calculation factor kr:0.1; ra max.:2.5 mm; Reference speed:340 r/min; B:56 mm; |
60.20.0414.575.01.1403 Standard 5 Slewing Ring Bearings | Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3400 rpm; D:130.0000 mm; Basic Static Radial Load Rating Co:95000 N; Oil Speed Rating n2:4500 rpm; B:57.20 mm; Grease Speed Rating n1:3400 rpm; d:60.000 mm; Accessories:Shield & Seal & Snap; Basic Dynamic Radial Load Rating C:121000 N; |
M4-22P4Z Rotek Slewing Ring Bearings | Calculation factor Y0:1.8; Calculation factor e:0.37; Da max.:56 mm; Mass bearing pair:0.59 kg; Fatigue load limit Pu:12.7 kN; Basic static load rating C0:116 kN; Calculation factor Y2:2.7; K:3 mm; d:30 mm; D:62 mm; T:42.5 mm; Ca min.:3 mm; 2B:40 mm; r3,4 min.:1 mm; ra max.:1 mm; Calculation factor Y1:1.8; Limiting speed:11000 r/min; Reference speed:7500 r/min; r5 min.:0.3 mm; Basic dynamic load rating C:106 kN; |
A8-30E8D Rotek Slewing Ring Bearings | rb max.:6 mm; da min.:513 mm; d:480 mm; K:12 mm; Calculation factor kr:0.35; Limiting speed:800 r/min; Reference speed:630 r/min; Mass bearing:587 kg; r1,2 min.:7.5 mm; D1 ≈:701 mm; Basic dynamic load rating C:7040 kN; s max.:12 mm; ra max.:6 mm; r3,4 min.:7.5 mm; db min.:562 mm; Design variant/feature:NNU/W33; B:308 mm; da max.:545 mm; b:22.3 mm; D:790 mm; |
L9-42E9Z Rotek Slewing Ring Bearings | H2:63.5 mm; B:80.169 mm; H1:104.775 mm; s:38.497 mm; Basic dynamic load rating C:426 kN; Limiting speed:2200 r/min; S:0.794 mm; H:213.519 mm; Attachment bolt diameter G:25.4 mm; J min.:254 mm; A:89.694 mm; da:101.6 mm; J max.:311.15 mm; L:361.95 mm; Mass bearing unit:19.7 kg; |
M4-26P4Z Rotek Slewing Ring Bearings | D:125.0000 mm; Oil Speed Rating n2:6000 rpm; Fillet Radius ra:1.50 mm; B:24.00 mm; Basic Dynamic Radial Load Rating C:60500 N; d:70.000 mm; Basic Static Radial Load Rating Co:45000 N; Oil Speed Rating Open/Shielded n2:6000 rpm; Accessories:Seal & Snap-Ring; Grease Speed Rating n1:5000 rpm; Sealed Speed Rating n3:3400 rpm; Grease Speed Rating Open/Shielded n1:5000 rpm; |
No. | Brand | K | B | a | w | T | b | E | H |
M7-39P1Z | Rotek | - | 410 mm | - | - | 410 mm | - | - | - |
R11-75N3 | Rotek | - | 25.654 mm | 22.362 mm | - | 26.543 mm | - | - | - |
R8-35E3 | Rotek | - | - | - | - | - | - | - | 67 mm |
R11-75E3 | Rotek | - | - | - | - | 45.3 mm | - | - | 156 mm |
A8-30E8D | Rotek | 12 mm | 308 mm | - | - | - | 22.3 mm | - | - |
162.20.0450.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
M5-38P1 | Rotek | - | 5 mm | - | - | - | - | - | - |
A12-32P2 | Rotek | - | 20.5 mm | - | - | - | - | - | - |
L6-33P9Z | Rotek | 6 mm | 400 mm | - | - | - | 11.1 mm | - | - |
H7-35N1 | Rotek | - | 40 mm | - | - | - | - | - | - |
A7-38N1 | Rotek | - | 44.45 mm | - | - | - | 4.8 mm | - | - |
W17-108P1 | Rotek | - | 35 mm | - | - | - | - | - | - |
61.20.0400.101.21.1503 | Standard 5 | - | - | - | - | - | - | - | 360.363 mm |
L6-33N9ZD | Rotek | - | 10.00 mm | - | - | - | - | - | - |
A13-46N1A | Rotek | - | 26.00 mm | - | - | - | - | - | - |
250.15.0475.013 Type 13/5 | Standard 5 | - | 21 mm | - | - | - | mm | mm | - |
R8-52N3 | Rotek | - | 82.00 mm | - | - | - | - | - | - |
H7-38E1 | Rotek | - | - | - | - | - | - | - | 336.55 mm |
L6-29E9Z | Rotek | - | - | - | - | - | - | - | - |
A14-47N5A | Rotek | - | 24.00 mm | - | - | - | - | - | - |
L6-29N9Z | Rotek | - | 26.00 mm | - | - | - | - | - | - |
62.20.0400.000.11.1503 | Standard 5 | 4 mm | 45 mm | - | - | - | - | - | - |
R8-30N3 | Rotek | - | 48.00 mm | - | - | - | - | - | - |
3R8-79P9 | Rotek | - | 85 mm | - | - | - | - | - | - |
R8-30E3 | Rotek | - | 35 mm | - | - | - | - | - | - |
A16-67P2 | Rotek | - | - | - | - | - | - | - | - |
L9-53E9Z | Rotek | - | 16 mm | - | - | - | - | - | - |
M6-35P1 | Rotek | - | 20.60 mm | - | - | - | - | - | - |
M5-34P1 Rotek Slewing Ring Bearings Video
Rotek M5-34P1 INTERCHANGE
Bearing Slewing Ring Part series M5-34P1 is a potential replacement for these common bearing part numbers:
M5-34P1
M5-34P1
M5-34P1
M5-34P1
M5-34P1
M5-34P1
M5-34P1
M5-34P1
Contact Us
- China Rexroth a10vg Hydraulic Pump Supplier
- Address560 G. Bishop Court, P.Box 7604,Mot 60056-7604, U.S.A.
- Phone(Working Time)+1-783-835-7536
- Fax
Rotek M5-34P1 Technical Articles
How is pump head calculation? |
How do you test a hydraulic pump? |
Bearing Slewing Ring CATEGORIES
- rexroth a10vg hydraulic pump
- rexroth gear pump 1pf2g2
- rexroth a10v hydraulic pump
- rexroth a4vg hydraulic pump
- rexroth a7vo107 hydraulic pump
- rexroth a8vo hydraulic pump
- rexroth aa4vg hydraulic pump
- rexroth 1pv2v3 hydraulic pump
- yuken a56 piston pump
- yuken pvr 150 hydraulic pump
- yuken ar16 hydraulic pump
- yuken pvr1t hydraulic pump
- yuken pvr50 hydraulic pump
- yuken pv2r12 hydraulic pump
- yuken dsg 03 vane pump
- yuken pv2r2 vane pump
- yuken dsg 01 vane pump
- vickers v10 vane pump
- vickers eaton 70160 hydraulic pumps
- vickers v20 vane pump
- vickers v20 hydraulic pump
- rexroth mnr 0510 gear pump
- vickers vtm42 hydraulic pump
- vickers v20 hydraulic pumps
- vickers v20f hydraulic pump
- vickers 2520v hydraulic pump
- vickers v10 hydraulic pump
- parker pgp620 gear pump
- parker pgp517 gear pumps
- parker pv046 hydraulic motor
- parker 5o5 gear pumps
- parker 110a hydraulic motor
- parker p16 gear pump
- parker pgm511 hydraulic drive motors
- parker pvp33 pump motor
- parker b22 commercial gear pumps
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Thrust Tapered Roller Bearings
- Thrust Cylindrical Roller Bearing
- Thrust Spherical Roller Bearing
- Complex Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings